The aluminum profile extrusion press machine plant line has been continuously upgraded since its occurrence. Of course, there are significant updates in the technical level, which can be confirmed by its actual operation method. The aluminum profile extrusion press machine plant line of the transmission system is built-in, and the recent aluminum profile extrusion press machine plant line has already established mechanical automation, but even so, common faults can not be prevented by machinery and equipment.

When the aluminum profile extrusion press machine plant line is used, many common faults will still occur, because its extrusion system software depends on the main variable frequency governor to operate the variable frequency speed regulation motor and gradually convey it to the screw rod according to the reducer distribution box and cross spline. Therefore, once the level and its variable value are replaced, there will be abnormalities.

The feeding system software is operated by the data signal transmitted by the time controller or level meter. The most likely problem in this part is the untimely feeding, which may be caused by the obstruction of the data signal transmitted by the level meter and the failure of the feeding system software to feed normally. The full-automatic aluminum alloy profile filling machine is equipped with motor control machine equipment, so its common faults will be indicated on the display screen, which is more visual. Only by clearing and calibrating the common faults indicated, the machine and equipment can be restored to operation.

What are the guidelines for daily maintenance and repair of extruder?

While the extruder provides convenience for everyone's operation, as a customer, we also have to strengthen its maintenance. The following are some methods I summarized about the maintenance and repair of the extruder, which we look forward to grasping. In terms of daily work, we must carry out medical care for the extruder as soon as possible, especially to ensure its cleaning level. In the case of cleaning, the key parts depend on the filter screen of the gasoline pump. At the same time, it is also necessary to maintain the scratch plate and pump shell of the gasoline pump. No matter how good the sealing standard of the suction and transmission pipeline is, the gasoline pump has certain advantages

Therefore, pay attention to the oil in the oil tank. The repair of machinery and equipment requires accumulated work experience. Therefore, we should often observe the operation of the equipment and often detect the working pressure and natural pressure of the equipment tableVoltage, use an ammeter to measure the three currents of the motor, and maintain all normal operation of the motor, so as to prevent sudden shutdown caused by burning the motor or overweight of the motor, and try to avoid common faults.