Now the copper aluminum profile extrusion press machine plant line has been popularized and applied. The deformation of aluminum profile is usually measured by the deformation degree used for manufacturing through the extrusion coefficient. The processing equipment is used for a small part of railway vehicles. The main body of process technology profile, aluminum profile production equipment, and aluminum alloy profile have improved structure, as well as other technical conditions applicable to equipment homogenization and aluminum extrusion, processing and use.

The key factor affecting the operation of the copper extrusion machine is to monitor the status of the copper extrusion machine immediately and confirm the failure rate of the copper extrusion machine through the local area network. However, according to the operation formula of the copper extrusion machine, the operator can accurately observe the failure rate of the copper extrusion machine and reduce the operation rate of the copper extrusion machine, Considering the actual operating conditions of the project profile extruder, but from an engineering point of view, this method is inferred to confirm the deformation resistance and the formula used to calculate the extrusion force.

Now, the technical operation of copper aluminum profile extrusion press machine plant line is the process of aluminum ingot extrusion forming. The materials for the analysis of aluminum and workflow are discussed. The cutting, physical properties and segmentation technology of aluminum profile extrusion technology, solutions to related problems, precision automation and production line of copper aluminum profile extrusion press machine plant line are discussed. Because the copper aluminum profile extrusion press machine plant line recognizes that different parts of the copper aluminum profile extrusion press machine plant line are also suitable for small temperature difference under high temperature and high friction. In addition to the high temperature of the metal, the tool is very sticky, so the service life of the copper aluminum profile extrusion press machine plant line is improved, the quality of the extruded product surface is improved, the inner wall of the extrusion cylinder is usually cooled by air and cooled by air, and water is inevitably used for heating erosion to avoid cracking due to rapid heating. The characteristics of this method depend on the fact that there are ingot surface and extrusion cylinder wall.