The current copper aluminum profile extrusion press machine plant line is an indispensable equipment for manufacturing many products. With the rapid transformation of industry, the efficiency of copper aluminum extruder can be further improved, so as to reduce economic benefits. For cold extrusion, the working efficiency can be improved, which can first reduce the treatment of wastewater, make the scale insoluble and affect the performance of the equipment. Secondly, the pressure of the new pressure copper aluminum profile extrusion press machine plant line can be further reduced, This usually consists of a booster pump.

Nowadays, the most important thing of copper aluminum profile extrusion press machine plant line is to use the control of relay circuit, and it has some shortcomings. Therefore, the aluminum automatic control of copper aluminum profile extrusion press machine plant line and the objective requirements of the automation of copper aluminum profile extrusion press machine plant line in each process are the design characteristics of greatly improving the programming completion, measuring work efficiency, establishing comprehensive economic and social benefits, and the installation and commissioning of large copper aluminum profile extrusion press machine plant line, The steps and precautions used are very important. The feedback of the outlet temperature of the extruded product is used to control the extrusion speed as a new method.

The simulation parameters are used in the double hydraulic copper aluminum profile extrusion press machine plant line for production verification. Nowadays, the main technical parameters of the aluminum extrusion production line are used to control the extrusion speed of aluminum profile. Because the output speed of pure metal is lower than that of alloy, the speed of copper aluminum profile extrusion press machine plant line or the metal flow rate in the deformation zone is faster, and the uniformity of metal movement is small, so the product only needs to be compressed, It has a higher speed than extruding and outputting intuitive products.

And prevent the metal from filling the hole of the die, and in this process, in modern extrusion technology, the pipe will also be separated and corroded. Through the separation and extrusion of the pipe, it is necessary to consider that its stripping plate and self combined co extrusion equipment are used to separate and press properly, so as to prevent the eccentricity of the pipe, on the basis of extrusion, so as to prevent the high-temperature hydrolysis of some metals of the extrusion from returning to the matrix, It can be used as an extrusion technology for sealing water and shielding gas