Now the application of extrusion confidential seal structure, the fixed link of the inner surface with grooves, should be the inner side of the tube material movably installed on the mat, press pad on one side of the movably installed on the column, and the outer side of cylinder structure fixed installed near the bottom position, pressure column and combination, should be material barrel inner is equipped with the billet, The connecting block is fixedly installed on the outer surface of the other side of the material barrel.

Current aluminum profile extrusion press machine plant line, involving extrusion machine application structure, it has a connection piece, a fixed link and connection platform, connection piece is a good way to remove and replace the mold, and the fixed link can be bonded well with extrusion machine, the adapter can well placed billet, to better bring extrusion machine sealing structure to better use outlook, The improved structure of the widely used extruder.

Now used in extrusion machine, including the workbench, extrusion die is installed at the top of the table center, electric driver installed on the bottom of the extrusion die wall, the top of the floor installed in electric putter, four columns installed around the top of the workbench, the support plate is installed on the top of the support column, hydraulic cylinder installed in the center of the support plate on the top, The hydraulic station is installed on one side of the hydraulic cylinder, the hydraulic rod is installed at the bottom of the bottom of the upper support plate, the pressing sleeve is installed at the bottom of the hydraulic rod, the pressure head is fixed in the center of the sleeve, and the pressure head is connected with the fixed plate through the rotating shaft, so the extruder is convenient and efficient to use.

Current aluminum profile extrusion press machine plant line, including the body, the body in turn into mixing parts, heating, melting and heat insulation extrusion part and insulation extrusion parts of spiral bevel gear is installed on the joint, and helical gear meshing of spiral bevel gears, helical gears connected in the insulation extrusion part of the screw, the aluminum profile extrusion press machine plant line to avoid the bubble is contained in extrusion products, The quality of material particles was improved.