aluminum profile extrusion press machine plant line is a heavy equipment for extruding aluminum profiles. Extruded are aluminum profiles and aluminum alloy bar products, the work load is large, the degree of wear is high, in fact, the extruder and people have a life, so how to usually maintain to extend the service life of the extruder? The following is a small series of aluminum extrusion machine maintenance knowledge.

How to maintain the extended equipment mission when the aluminum extruder is not running?

1. Since it is maintenance, the usual cleaning work should be done well to keep the machine clean.

2. Not only the external maintenance, but also the internal maintenance of the machine is the most important. Then there will be residues stuck to the filter network of the oil pump when the oil pump is running, so it is necessary to clean it regularly, which is also to protect the oil pump plate and pump body. The oil pump is also a container for oil, and we also need to measure its temperature to prevent leakage and poor sealing.

3, usually on the machine with hand induction machine valve body temperature, some data of the equipment is recorded, later if there are any problems, or targeted maintenance, a lot of experience is slowly accumulated.

4. If there is a hole on the tank surface, it is necessary to put the return pipe into the surface of the tank pipe for sealing treatment, to prevent holes, and pay attention to the clean hydraulic oil.

5. Usually, the pressure and normal pressure of the motor should be detected frequently, and the three currents of the motor should be measured by the ammeter side, so as to protect the normal operation of the motor to avoid burning the motor or the motor overload resulting in sudden stop.