When the pipe bending machine is working, the wire is mainly energized to the coil, and the pressure plate is attracted after the power is energized, so as to realize the clamping of the thin plate between the pressure plate and the base, so as to meet the needs of various workpieces. It can be seen that only when the components of the pipe bender cooperate with each other, can it work better. Because the bender uses hydraulic transmission mode, its slider part is composed of a slider, a cylinder and a mechanical block fine tuning structure; The left and right cylinders of the pipe bender are fixed on the frame. The piston drives the slider to move up and down through hydraulic pressure, and the mechanical block is controlled and adjusted by the numerical control system.

The parts of the pipe bender include the synchronization system, the slider part, the baffle mechanism and the workbench part, etc. The synchronization system here is composed of torsion shaft, swing arm, joint bearing and other parts, the overall structure is simple, stable and reliable performance, high synchronization accuracy.

The coordination of each part of the pipe bender comprehensively improves the efficiency, accuracy, maintainability, universality and safety of the system, reduces the manufacturing materials, and is very convenient to use. The baffle material of the pipe bender is driven by motor, which drives the two lead screws to move synchronously through chain operation, and the size of the baffle is controlled by numerical control system. The workbench part is operated by the button box, so that the motor of the bender drives the retaining frame to move forward and backward, and the moving distance is controlled by the numerical control system. Therefore, in the usual use process, we must pay more attention to all aspects of the pipe bender.