Pipe bending machine is a kind of equipment composed of many parts, the first mentioned is the synchronization system, which includes torsion shaft, swing arm, joint bearing and other parts of the synchronization mechanism, has reliable and stable performance and high synchronization accuracy. It is not difficult to understand the working principle of the pipe bender. It is powered on by the wire to the coil, and then generates attraction to the platen, so as to realize the clamping of the thin plate between the platen and the base, and finally meet the needs of various workpieces.

Next is the slider part, in addition to the use of hydraulic transmission, it is also composed of the slider, cylinder and mechanical block fine tuning structure, through the hydraulic piston to drive the slider up and down movement. However, the seemingly simple process needs the cooperation of each part to fully play its due effect, any part does not meet the requirements, the whole operation will be affected.

The latter part is the workbench, which is operated by the button box, so that the motor of the bender drives the retaining frame to move forward and backward, and the moving distance is controlled by the numerical control system. The retaining mechanism is also an indispensable part of the pipe bender. It is driven by motor and drives the two lead rods to move synchronously through chain operation. The size of the retaining material is controlled by numerical control system.