What preparations should be made for the use of small electric pipe bending machine before starting? In addition, if users have problems in the use process, how should they deal with them in a timely manner? Now let's discuss it in detail.

1、 Before starting, the user needs to make some preparations for the pipe bender. Before starting the machine, the user needs to check whether the electrical equipment is loose, because during the transportation, the user may loose the screws of the equipment due to incorrect transportation or handling methods. In this case, the screws must be tightened in time to avoid other impacts caused by the loosening of the screws.

2、 The ground where the pipe bender is located must be flat, and there must be no too big slope to avoid the damage of the pipe bender due to the severe vibration during operation.

3、 After checking the surrounding environment, the user can directly connect the power supply to the pipe bender to check whether the equipment operates normally. First, turn on the switch to control the power supply and check whether the direction of the oil pump motor is correct. Generally, it turns clockwise in the front direction. If the direction is wrong, the power line may be connected to the wrong position. At this time, the power line can be reversed, The operation can be officially started only when there is no error in everything.

In a word, generally speaking, the pipe bender mainly uses the turbine reducer to rotate. Therefore, during the operation of the pipe bender, we should ensure that the bending radius area is uniform. The bends within 180 degrees can be adjusted normally. If the bends are about 90 degrees, they can be formed at one time.