Over the years, with the increase of engineering construction, significant changes have taken place in the pipeline industry. A large number of pipe products have been put into industrial projects. Taking the automatic pipe bending machine as an example, let's see how to deal with the rust removal problems encountered in pipe bending processing?

It may be a bit strange to hear about the automatic pipe bender for the first time, but in fact, we are not unfamiliar with pipes. In our daily life, we often see relevant pipeline transportation. For example, some gases or liquids need pipeline transportation, and even basic water resources need pipeline transportation. In fact, the form and function of transportation are almost the same. However, the curve processing we are talking about now is a form in industry, which is very rare. Specifically, how to deal with the problem of corrosion in curve processing.

If there is rust problem in the bend, it is recommended to use professional rust removal tools. For example, we can use some wire brushes to remove rust, and first deal with some oxide skin or rust on the surface. If the manual derusting tool cannot remove rust normally, it is also recommended to use the automatic pipe bender tool for derusting. Of course, the specific derusting process should be defined according to the relevant level.

We need to be clear that in the process of bending pipe, if there is some scaling, this kind of rust removal is very difficult. The general derusting process may not be completed, so it is necessary to pickle the elbow. If necessary, chemical method or electrolytic method can be used for better overall processing effect. In a word, derusting is not easy. If there are any problems during the processing, it is recommended to consult the experts in the industry, especially if you do not understand the use and operation of the automatic pipe bender, it is recommended to consult the customer service in a timely manner.