The basic aspects of the aluminum profile extruder, such as its structure, operation principle and price, are all its basic knowledge, so it is necessary to understand and grasp this product when we learn it. However, we need to point out that there are more aspects besides the above. More common sense content is waiting for us to explore and understand, rather than just enough. So, let's expand the common sense and explain more common sense. The last words can help us learn more about this extruder and make up for some professional common sense.

With regard to the aluminum profile extrusion machine, the following two parts will be divided into dividends. Their respect is:

(1) Tonnage calculation of aluminum profile extruder

The tonnage calculation of aluminum profile extruder mainly depends on the connection between the extrusion cylinder and the aluminum rod. The connection is generally as follows: the 1000 ton extruder uses 120-134 aluminum rods, and the 1500 ton extruder uses 152-1782000 tons and 2033600 tons and 310 tons, so we can compare and select.

(2) Basic operation process of aluminum profile extruder

The basic operation process of the aluminum profile extruder is: first heat the aluminum bar, generally use the power frequency furnace to heat it to 480 degrees, and then conduct hot shearing. After the aluminum rod is cut well, it can be sent into the ingot lifting bucket of the extruder, and then pushed into the extrusion cylinder through the extrusion rod for extrusion operation, and become a product.