How to understand the cause of processing deformation of copper and aluminum profile extrusion machine
time2023/03/07
- In the specific process of processing, various processing requirements used in the production process, so the use of copper and aluminum profile extrusion machine is very strict to improve the performance and the effect of using the product.
In the specific process of processing, various processing requirements used in the production process, so the use of copper and aluminum profile extrusion machine is very strict to improve the performance and the effect of using the product, and this area can be free of defects, and other parts can be removed to provide cold aluminum deformation in the cracked glass, reduce the density of aluminum, and have a significant impact on the change. Now, This structure is confirmed as the pressure in the copper and aluminum extrusion machine.
How to understand the cause of processing deformation of copper and aluminum profile extrusion machine
Especially on the basis of specific conditions, the proposed design method of specific extrusion pad and finite element simulation of copper and aluminum profile extrusion machine are accurate, which can improve the life of specific extrusion pad. Aluminum profile is widely used in many fields, industry and other applications. In order to improve the performance of extrusion process and confirm the influence parameters and layout, its response factor is to improve the overall size and formation, Based on the numerical simulation and improved algorithm, the height of the material is combined to further improve the performance of the product deformed by the technical grid, and the straight line should be recognized.
However, according to the pressure in the copper and aluminum profile extrusion machine in front, and the pressure control pressure should not be too slow to manually control the above, and the observed situation is crowded by the withdrawn guests, it is difficult to control according to the process of the extrusion temperature of the extruded alloy, if its multiple followers are small at home, the extrusion and extrusion speed is to ensure the product quality, there is no problem in completing the extrusion process, and the key is to improve the processing efficiency.
Because of the installation of the copper and aluminum profile extrusion machine mould, when it overlaps the extrusion position of the support body and the matrix, its mould is added to the matrix of the hollow shaft. The mould can be replaced at the beginning of the moving beam and the crowded guest. Then, in the two axis reverse copper and aluminum profile extrusion machine, the extrusion direction of the extrusion product is the same, the axis movement is the same, and the relative movement direction of the die axis is more important.