Optimized design of copper and aluminum profile extrusion machine
time2023/03/09
- When the extrusion method is carried out by extrusion, if the industrial aluminum profile returns to the die hole copper aluminum profile extruder, if the friction force is smaller than its cutting force.
When the extrusion method is carried out by extrusion, if the industrial aluminum profile returns to the die hole copper aluminum profile extruder, if the friction force is smaller than its cutting force, the metal clip is attached to the die and the product friction is on the surface, the actual operation of the improved system copper aluminum profile extruder shows the ventilation effect of the copper aluminum profile extruder, so the hydraulic impact of the main cylinder extrusion is effectively improved, It is also applied to the AC synchronous servo system of the copper and aluminum profile extrusion machine.
Optimized design of copper and aluminum profile extrusion machine
Now, in order to improve the processing and control performance of the profile extrusion machine, first of all, the structural performance of the copper and aluminum profile extrusion machine and the control principle of the AC servo system have been studied. The explicit PID control algorithm design has been adopted, and the AC synchronous servo system has been adopted as the device of the copper and aluminum profile extrusion machine. The hardware design and system development have been developed. The conversion process has studied the two main modules of electrical conversion and pipeline conversion. According to the results of erosion, The split mode subdivides the two holes so that only the separation mode can be compared. This new separation mode structure has an intuitive structure and is easy to operate.
It has been proved through practice that the semi-hollow profile divided by the new die structure has been tested, and the extrusion material can greatly improve the extrusion efficiency of the copper-aluminum profile extruder, and can effectively improve the life of the die. The extrusion of the aluminum profile has high dimensional accuracy, so it is an interesting new type of equipment. The copper-aluminum profile extruder is used to cool the cast iron bar extruded from the die, due to the influence of material properties.
According to the structural characteristics of the equipment, the copper and aluminum profile extrusion machine can also be divided into several types, the frame below the extrusion stress tube type and the rear locomotive type. The frame type can be executed forward/backward through the action of the lower frame, and the extrusion device can also be divided into new systems. Therefore, the control application of the equipment has high accuracy.