The following is a small series of aluminum extrusion machine maintenance knowledge.

The pipe bending machine industry in our country has developed from the initial manual to the now semi-automatic pipe bending machine and even fully automatic pipe bending machine

What should be done to reduce the thickness of pipe bending machine?

More tests and field tests should be carried out during the development of electric pipe bender.

When aluminum profile extrusion press machine plant line work without exception and its auxiliary equipment, the whole production line will be step-by-step all its new obligations.

General bend the oil cylinder oil because oil cylinder for a long time did not change the sealing ring Cause sealing ring wear Sealing ring limited life normal two years

Pipe BENDER is suitable FOR installation and repair in factory, warehouse, wharf, construction, railway, automobile, etc. I

There are three types of overall failure of bending components of pipe bending machine:

After a period of practice and found that many customers know extrusion machine, but I don't know what kind of aluminum profile extrusion press machine plant line produced by appropriate oneself

When the pipe bending machine is working, the wire is mainly energized to the coil, and the pressure plate is attracted after the power is energized

Pipe bending machine is suitable FOR installation and repair in factory.

In the face of the current industry situation, pipe bending machine enterprises, agents and users should work together to actively respond.

In the field of automation, rotary encoders are sensors used to detect displacement, Angle, velocity and acceleration

Pipe bending machine is a kind of equipment composed of many parts, the first mentioned is the synchronization system,

More tests and field tests should be carried out during the development of electric pipe bending machine.

In order to ensure that the pipe bending machine can operate normally and stably, the first thing to do is to ensure that its hydraulic system has a good state.

In order to effectively improve the stiffness of the main shaft of the pipe bending machine, not only three support structure should be adopted,

With the development and progress of pipeline technology for pipe bending machine, the transportation of crude oil and refined oil products has been changed from the transportation of automobile and train to the transportation of long-distance oil and gas pipelines.

Pipe bending machine is suitable FOR installation and repair in factory, warehouse, wharf, construction, railway, automobile, etc.

The advantage of the volume speed regulation loop of the pipe bending machine is that the oil output of the hydraulic pump directly enters the executive component,

When bending, stop when the bending angle is greater than the required angle l °～ 2 °, return the pipe bending machine to the starting point, and measure the bending radius and angle with a sample plate.

With the development of modern technology, the improvement of the industrial level, the development and research of CNC numerical control pipe bending machine,

The adjustment of bending force of the pipe bending machine is mainly based on the calculation formula to calculate the thousand Niu value of the bending force of the sheet metal

aluminum profile extrusion press machine plant line process has high capacity or capital elasticity, large-scale production and diversified products.

For pipes with large bending diameters, but with small bending radius and thin pipe walls, crease proof molds and ball mandrel rods should be used.

First from the process of analysis:1. Before opening the aluminum extrusion machine, ensure that there are no sundries and oil stains around the equipment and on the machine.

The difference between aluminum profile extruder and copper profile extruder?

In the process of using the pipe bending machine, the problem appears more is its mold part. Under the influence of this adverse factor.

The majority of the energy consumption of the pipe bending machine is the energy consumption of the oil pump of the hydraulic system

As we all know, the main power of the hydraulic pipe bending machine is the hydraulic oil pump to input hydraulic oil, so that the hydraulic solenoid valve can provide the hydraulic power to the cylinder piston to realize the operation of each part. It was originally set at 90 ° under normal conditions

One pipe one mold For a pipe, no matter how many bends there are, no matter how the bending Angle is (not more than 180°), the bending radius should be uniform. Since a tube is a mold, then, for pipes with different diameter specifications

When the free pipe bending machine is used for bending, the bending radius of the pipe bender is 0.156 times of the opening distance of the female die. During the bending process of the free pipe bender, the opening distance of the female die shall be 8 times of the metal material thickness. For example, when the opening distance of 1/2 inch (0.0127 m) is used to form 16 gauge mild steel, the bending radius of the pipe bender of the part is about 0.078 inch.

The automatic pipe bending machine is a machine newly developed in recent years. It can be said that the automatic machinery profession in China is developing rapidly, and the automatic machine tools are developing at a high level. The functional parts of the automatic machine tools have played an extremely important role.

In general, the planning information of bending machine is to show the drawing data of pipe fittings by the coordinates of the connecting points on the drawing

After installing the pipe bender die, the pipe bending machine is really completed. Whether hydraulic pipe bender or CNC pipe bender, attention shall be paid to the installation of pipe bender die.

With the development of modern technology, the improvement of the industrial level, the development and research of CNC numerical control pipe bending machine, three-dimensional hydraulic pipe bender and so on some high-performance pipe bender.

Numerical control pipe bending machine is a kind of two cylinder parallel processing, symmetrical push hydraulic press, pump room adopts comprehensive connection mode, simple maintenance.

he numerical control pipe bending machine can bend the hoop or bend the rib. The bar reinforcement can be directly cut and bent by the numerical control machine according to the charging and discharging frame.

At present, many equipment application has realized the automatic control mode, make the product processing efficiency has improved, not only ensure the machining quality of product, but also can save more cost for manufacturing enterprise...

Now the bending process is indeed a process that all major manufacturers will understand. Through this process, the bending process can be completed.